User Tools

Site Tools


mercator:running_rigging

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
mercator:running_rigging [2011/01/11 10:30]
krisa
mercator:running_rigging [2014/06/24 05:40] (current)
Line 1: Line 1:
 +====== Notes ======
 +  * AmSteel Blue: Samson brand Dyneema SK-75 12-strand single-braid, "Samthane" coating
 +  * Dynex Dux: Dyneema SK-75 that has been heated and stretched
 +
 +====== Line Sizes (working strength, #s)  ======
 +
 +|                 ^ Main Halyard ^ Jib Halyard  ^ Spinnaker Halyard ^ Jib Sheets    ^ Spinnaker Sheets ^ Notes ^
 +^ AmSteel Blue    | 3/16" (4900) | 3/16" (4900) | 3/16" (4900)      |                                | $$$ Dyneema SK-75, Size large enough for auto-tailing winch |
 +^ Samson XLS      | 3/8" (3700)  | 3/8" (3700)  | 3/8" (3700)       | 7/16" (4900)  | 3/8" (3700)      | $$ **Baseline** |
 +^ Samson LS Yacht |              |              |                   | 7/16" (4200)  | 7/16" (4200)     | $             |
 +
 +====== Winches ======
 +
 +  * Self-tailing unless otherwise noted
 +
 +|                 ^ Main Halyard ^ Jib Halyard  ^ Spinnaker Halyard ^ Jib Sheets    ^ Spinnaker Sheets ^ Notes ^
 +^ Andersen        | 12ST (FS)    | 12ST (FS)    | 12ST (FS)         | 28ST, 40ST (FS) | 12ST (FS)      | $$$, FS = Full stainless |
 +^ Harken          | 20ST         | 20ST         | 20ST              | 40.2ST        | B16ST            |       |
 +^ Hutton          | 8            | 20           | 20                | 40            | 20                     |
 +^ Lewmar          | 7            | 15           | 7, 8              | 15, 16, 30    | 15                     |
 +
 +====== Deck Organization ======
 +
 +===== Hardware =====
 +  * Ronstan orbit blocks (50 class) attached to Dyneema lashed to bottom of mast
 +    * What about Antel low friction rings (14mm)?
 +  * For reefing lines, orbit blocks lashed to mast at boom level?  Then down to blocks lashed to bottom of mast heading to cockpit.
 +    * Again, can Antel's be used?
 +  * Cleats/clutches
 +    * Spinlock basic jammers have higher breaking load than Lewmar clutches
 +    * After that, Lewmars offer best bang for breaking load buck
 +
 +===== Lines =====
 +From http://www.blumhorst.com/catalina27/RiggingDesign.htm
 +
 +  * Port
 +    * Jib halyard to clutch
 +    * First reef clew to clutch
 +    * Second reef clew to clutch
 +    * Outhaul to clutch
 +    * Cunningham to cam cleat
 +    * Port preventer - horn/jam/cam cleat
 +  * Starboard
 +    * Main halyard to clutch
 +    * First reef tack to clutch
 +    * Second reef tack to clutch
 +    * Topping lift - horn/jam/cam cleat
 +    * Vang to cam cleat  
 +    * Starboard preventer - cleat, jam-cleat, or cam cleat
 +
 +====== Boom Vang / Preventer ======
 +  *One 6:1 purchase will be used, each end connected to a soft pad-eye amidships and run to the cockpit.
 +    * Antel rings?
 +    * REI rings? (inexpensive, 5000lbs/mbs)
 +
 +
  
mercator/running_rigging.1294741841.txt.bz2 ยท Last modified: 2014/06/24 05:40 (external edit)